Engines By Cloverleaf

Tremendous attention to detail from making sure we know what you want from your engine to the polishing of the cam cover are what make Cloverleaf engines special.

 All of are engines use the finest components available today. Where applicable we upgrade to newer style components with greater durability and performance.

 Each engine is completely disassembled cleaned and checked using magna fluxing, pressure testing and other techniques to insure the integrity of the unit. Blocks, rods, cranks, and cams are reconditioned or replaced. Pistons are new OEM or custom, bearings are the finest available. The same with chains, gears and gaskets.

 We like to match your driving needs to your engine. Are short trips and dinking around town what you plan to do? We will keep that in mind when we design your engine. A car that you plan on doing some rallies and a little vintage racing but still need to be very drivable on the street is easily done. Vintage competition rally or racing? No problem.

 All engines are finished to either your paint scheme or as it left the factory. Head pipes are painted with high temperature coatings or where performance is more of an issue high temperature ceramic coatings are used. Parts may be powder coated to add that special custom look

 Pre-war to modern - Street to full race -  We do the design work and math to make sure your engine is what you want.

 Dynamometer testing & setup available